Selective laser sintering (SLS) is a powder bed printing technology. It uses a laser to fuse tiny bits of nylon powder, tracing the geometry of digitally sliced CAD models layer by layer and working from the bottom of the part upwards.
Selective laser sintering (SLS) is an industrial 3D printing process that produces accurate - rapid prototypes and functional production parts in as fast as 1 day. Multiple nylon-based materials are available, which create highly durable final parts.
SLS design guidelines will help you understand capabilities and limitations.
- Shipped in 1 to 7 working days
PA 12 White
ABS-Like White (Accura Xtreme White 200) is a widely used general purpose SLA material. In terms of flexibility and strength, this material falls between moulded polypropylene and moulded ABS, which makes it a good choice for functional prototypes. Parts as large as 736mm x 635mm x 533mm can be built with ABS-Like White so consider it a primary option if you require an extensive part size build envelope.
- Durable, general purpose resin
- Accommodates extra-large parts
PA 11 Black
PA 12 White is an economical material choice for functional prototypes and end-use parts. It offers high impact and temperature resistance, is very durable, and remains stable under a range of environmental conditions. The nylon material exhibits a white finish with a slightly rougher surface texture compared to other nylons.
- Strength and stiffness
- Well-balanced material properties
PA 12 40% Glass-Filled
PA 12 40% Glass-Filled is a polyamide powder loaded with glass spheres that add stiffness and dimensional stability. The material possesses higher thermal resistance than unfilled polyamides and exhibits excellent long-term wear resistance. Due to the glass additive, it has decreased impact and tensile strengths compared to other nylons.
- Stiffness and dimensional stability
- Long-term wear resistance
- High-temperature resistance